Hydraulic Governor G - 840 (Basic Model)
- Output torque range is 8, 15, 25, 34 and 40 ft.lbf on single frame.
- Variable RPM range 500 to 1500
- RPM Inc/Dec knob with vernier analogue counter.
- Mechanical shutdown.
- Internal droop adjustment.
- Both side output shaft with load indicator
- Suitable for fire proof areas.
Hydraulic Governor G - 840 MS
With Synchronizing Motor & Shutdown Solenoid.
- Output torque range is 8, 15, 25, 34 and 40 ft.lbf on single frame.
- Variable RPM range 500 to 1500.
- Synchronizing motor voltage 24V DC or 220V AC.
- RPM Inc/Dec through knob with vernier analogue counter and from remote panel.
- Shutdown solenoid voltage 24V DC energize or de-energize to shutdown.
- Internal droop adjustment.
- Both side output shaft with load indicator.
- NOT Suitable for fire proof areas.
Hydraulic Governor G - 840 MSD
With Synchronizing Motor,
Shutdown Solenoid & External Droop.
- Especially for parallel generators load sharing.
- Output torque range is 8, 15, 25, 34 and 40 ft.lbf on single frame.
- Variable RPM range 500 to 1500.
- Synchronizing motor voltage 24V DC or 220V AC.
- RPM Inc/Dec through knob with vernier analogue counter and from remote panel.
- External droop adjustment knob with indicator.
- Both side output shaft with load indicator.
- NOT Suitable for fire proof areas.
Hydraulic Governor G - 840 P
With Pneumatic Speed Setting.
- Output torque range is 8, 15, 25, 34 and 40 ft.lbf on single frame.
- Variable RPM range 500 to 1500.
- RPM Inc/Dec through remote panel.
- Pneumatic speed range 3 to 15 PSI or 0.5 to 5.5 BAR.
- Emergency RPM Inc/Dec manual knob.
- With internal droop adjustment.
- Both side output shaft with load indicator.
- Especially for fire proof areas and marine engines.
Hydraulic Actuator A-840
- Output torque range is 8, 15, 25, 34 and 40 ft.lbf on single frame.
- Variable RPM range 500 to 1500.
- 0 to 200 mA input.
- It can work with any electronic governors output 0 to 200mA.
- Both side output shaft with load indicator.
- Linearity within 0.5%.
- Hysteresis within 3% of maximum stroke.
Hydraulic Governor STG (Basic Model)
- Output torque range is 13 and 17 ft.lbf on single frame.
- RPM range is 1100 to 2400, 2000 to 4000 & 4000 to 6000.
- RPM Inc/Dec knob with indicator scale.
- Internal droop adjustment.
- Both side output shaft with load indicator.
- It can be mounted vertically or horizontally.
- Suitable for fire proof areas.
Hydraulic Governor STG -M
With Synchronizing Motor.
- Output torque range is 13 and 17 ft.lbf on single frame.
- RPM range is 1100 to 2400, 2000 to 4000 & 4000 to 6000.
- Synchronizing motor voltage 24V DC or 220V AC.
- RPM Inc/Dec through knob with indicator scale and through remote panel.
- Internal droop adjustment.
- Both side output shaft with load indicator.
- It can be mounted vertically or horizontally.
- NOT Suitable for fire proof areas.
Hydraulic Governor STG-P
With Pneumatic Speed Setting
- Output torque range is 13 and 17 ft.lbf on single frame.
- RPM range is 1100 to 2400, 2000 to 4000 & 4000 to 6000.
- RPM Inc/Dec through remote panel.
- Pneumatic speed range 3 to 15 PSI or 0.5 to 5.5 BAR.
- Emergency RPM Inc/Dec manual knob.
- Internal droop adjustment.
- Both side output shaft with load indicator.
- It can be mounted vertically or horizontally.
- Especially for fire proof areas.
Hydraulic Actuator STEA
- Output torque range is 13 and 17 ft.lbf on single frame.
- RPM range is 1100 to 2400, 2000 to 4000 & 4000 to 6000.
- 0 to 200 mA input.
- It can work with any electronic governors output 0 to 200mA.
- Both side output shaft with load indicator.
- Linearity within 0.5%.
- Hysteresis within 3% of maximum stroke.
Hydraulic Amplifier HA 5.25
- Hydraulic amplifier for steam turbine to operate higher torque throttle valve.
- It operate with external oil pressure from 100 to 500 psi
- It can be mounted vertically or horizontally.
- Input shaft with scale indicator on both side.
- Output shaft with load indicator.
- Any minimum torque governor/actuator can be connected to HA 5.25 for higher torque output.
Electronic Governor EG - 2019
- Electronic governor for steam turbine/diesel engine.
- Wide range of RPM setting.
- Input 24V DC
- Output 0 - 200 mA
- Idle to rated speed ramp timing adjustment.
- Droop adjustment.
- Starting fuel limit adjustment.
- Stability, Gain, Compensation adjustment for smooth operation.
- It can work with any actuator input 0 to 200mA.
Hydraulic Governor Auto Controller HG-AC (HMI - TUCH SCREEN)
- 4-inch / 7-inch touch screen HMI.*.
- Idle RPM setting
- Rated RPM setting.
- Idle to Rated and Rated to Idle speed time setting.
- High/low frequency breaker trip setting.
- Manual / Auto mode for increase/decrease of RPM.
- Manual over speed test available.
- Safety trips and reset through HMI with indicator.
- Separate emergency stop switch with indicator provided
- Panel mounting.
